1. Thermowells
We manufacture all types of thermowells.
These are of two types - Barstock and fabricated
Barstock thermowells are derived by machining the stainless steel rods. There is no welding or seam involved.
Barstock thermowells are used for high pressure applications where safety cannot be compromised.
Fabricated thermowells are low cost and demand low pressure applications.
These are fabricated by welding threaded parts to the SS tubes.
Thermowell type and material is selected as per application.
Materials normally used are SS 304/ SS316/SS310/SS446/ Inconel.
2. Process connections
Process connections are used to install the sensors into the media.
Thermocouples cannot be directly inserted as they may tumble or lose contact with the media.
They act as guide and provide mechanical stability to the sensors.
Process connections are of different types and sizes.
BSP / NPT / metric are standard types used.
1/2", 1/4", 1/8", 3/8" thread sizes can be supplied as per requirement.
Some connections are fixed or welded to the temperature sensors.
Some are movable or adjustable and can be fixed at desired length.
3. Flanges
Flanges with insertion holes as per sensor diameter are manufactured as per demand
Flanges have similar application as process connections.
The flanges are fixed type or movable. A movable flange moves alog the length of the thermocouple and can be fixed with a screw
Flange dimensions are defined by the application and thermocouple dimensions.
Standard flanges in SS or aluminium or MS can be supplied as per requirement.
Round, ellipse, square , rectangular are different shapes that can be supplied.
4. Cables
Mapping and validation is a process that is carried out to validate the following using NABL equipments.
A) RTD Cables - We supply RTD cables with various sizes.
These are corrosion resistant and excellent quality cables
They are used to transfer electrical signal from source to destination.
Selection of proper sheath defines the life of the cable.
Sizes availabe : 1/22, 1/24, 3/22,3/24,7/24, 7/36
Insulation : Teflon/teflon, tef/tef/SS
B) Thermocouple Cables - Thermocouple cables come in 2 forms.
Original conductor and compensating grade.
Vaiants available : J, K, and T type
Original conductor cables are used to manufacture thermocouple.
Compensating grade cables are used for instrumentation connections.
Sizes availabe : 1/22, 1/24, 3/22,3/24,7/24, 7/36
Insulation : Tef/tef, tef/tef/SS, fibre glass/ fibreglass, tef/tef,fg
C) PVC Thermocouple Cables - The cable is double PVC coated and used for general applications.
The cable is double PVC coated and used for general applications.
It is compensating type cable. Normally used in heat treatment and heavy duty applications.
Rugged and heavy duty.
Sizes availabe - 1/22, 1/24, 3/22,3/24
Insulation- PVC/ PVC
D) Multicore Compensating Cables - These are multicore cables used in instrumentation applications.
Multiple sensor connectivity in datalogging and SCADA applications is carried out using these cables.
These are shielded and non shielded depending upon the application.
Shielded cable are used in noise sensitive and harsh enviornments.
Sizes availabe - 1/22, 1/24, 3/22,3/24,7/24, 7/36
Insulation- Teflon/ teflon with shields